mx-5

I've done a search and can't find any... I'm looking for pictures on how the cat and the hangers on the exhaust are attached. I've installed a Borla exhaust recently, and I find the exhaust to hang lower than it should and the resonator is scraping occasionally over speed bumps. I've also noticed the cat doesn't attach to anything underneath the car.

Thanks!

John P. (TT 225)

go to schwing's fotki album

TTschwing

If the Borla has an arm to mount on the rubber donut, you might consider adding this....

<img src="http://images.fotki.com/v3/photos/7/7305/84319/exhaust_hangar-vi.jpg">

Goes here....all the bolts/nuts are already on the car. About $30 and well worth it for a little more support.

<img src="http://images.fotki.com/v3/photos/7/7305/100339/DSCF0037-vi.jpg">

mx-5

Clicked through 90% of his albums and I can't find pics showing cat/exhaust hangers...

mx-5

All 3 of these are already attached to the existing rubber donuts.

I'm more concerned with how the cat (where the Y and the shielding is) doesn't appear to be attached to anything under the car.

I'll snap some pics when I get home tonight.

Thanks for the pics.

TTschwing

You can see the midpipe to Cat clamp at the front. Hanger is between the cat and the resonator...

TTschwing

You don't have the arm for the center hanger then. I'm sure a muffler shop could tack one on there after you bolt on the chassis hanger piece so they could locate it correctly. Should only cost a few bucks.......

JustJeff

<ul><li><a href="http://jbipes.home.attbi.com/ttr/exhaust.html">Milltek Install</a></li></ul>

mx-5

<ul><li><a href="https://forums.audiworld.com/tt/msgs/898056.phtml">https://forums.audiworld.com/tt/msgs/898056.phtml</a</li></ul>