front licsence plate holder
#2
Guest
Posts: n/a
The installation bulletin show it as being pop-riveted on.
66-A035
Technical Bulletin
Important!
Please give copies to
all your Audi Technicians
C 66--99--03
E 1999 Audi of America, Inc.
-- Install 4 pop rivets Part No: N 903 463 01
(included with license plate holder in luggage
compartment) fromfront side of license plate
holder (-arrows-) through filler panel.
· Pop rivets should be fully seated into the
raised locator circle before collapsing rivet.
-- Install filler panel with attached holder into
bumper cover by inserting top of filler panel
into bumper cover first (snap bottom in last).
Note:
It is important to make sure that the bottom of
the filler panel is completely seated into the
bumper.
-- Attach license plate to the holder.
CAUTION!
Part numbers are for reference only.
Always check with your Parts Dept. for
the latest parts information.
Technical Bulletin
Important!
Please give copies to
all your Audi Technicians
C 66--99--03
E 1999 Audi of America, Inc.
-- Install 4 pop rivets Part No: N 903 463 01
(included with license plate holder in luggage
compartment) fromfront side of license plate
holder (-arrows-) through filler panel.
· Pop rivets should be fully seated into the
raised locator circle before collapsing rivet.
-- Install filler panel with attached holder into
bumper cover by inserting top of filler panel
into bumper cover first (snap bottom in last).
Note:
It is important to make sure that the bottom of
the filler panel is completely seated into the
bumper.
-- Attach license plate to the holder.
CAUTION!
Part numbers are for reference only.
Always check with your Parts Dept. for
the latest parts information.
Thread
Thread Starter
Forum
Replies
Last Post
A4Sooner
A4 (B6 Platform) Discussion
2
06-01-2005 11:45 AM
DennisD
S4 / RS4 (B5 Platform) Discussion
2
02-09-2002 09:38 PM