Putting in new brakes and suspension.
Thread Starter
AudiWorld Newcomer
Joined: Dec 2018
Posts: 3
Likes: 0
Putting in new brakes and suspension.
I have an 2002 Audi TT and I want to put a new suspension and brake system into it. I’m not sure what to look for and would appreciate some help looking for good brands and also what I have to put in or take out for this to work. Like if I get a bigger and better brake system what needs to come out and be replaced and what can stay in. Please help. Matt
AudiWorld Super User
Joined: Apr 2001
Posts: 3,041
Likes: 290
From: Las Vegas
Don't know what you mean by replacing the "brake system". If you want larger brakes, a lot of folks like Brembo Big Brake. If you want new rotors/pads, I've tried several over the years on my TTs and I like EBC the best. I have their slotted sport rotors and red pads. Initial bite is a big improvement over OEM, no fade on the track, no noise, and very low dust. If you track a lot, I'd use their yellow pads. I've also used Zimmerman cross-drilled rotors on my Mk 1s and liked them. If you go with cross-drilled, make sure they were fabricated at the factory and not some aftermarket shop buying solid rotors and drilling them.
Thread
Thread Starter
Forum
Replies
Last Post
While I was changing the Starter I noticed pad wear, Inner pads very low Outer pads thick, Calipers?
Mushasho!
Audi Original "S" Cars
8
Feb 23, 2007 09:50 AM
123Thumperer®
RS 6 Discussion (C5)
12
Nov 11, 2005 09:54 AM
sidespar
Audi 90 / 80 / Coupe quattro / Cabriolet
14
Nov 29, 2004 06:30 PM
