SoftBoot Test
#1
AudiWorld Senior Member
Thread Starter
Join Date: Mar 2001
Posts: 921
Likes: 0
Received 0 Likes
on
0 Posts
SoftBoot Test
I have had the Stratmosphere SoftBoot since April. Since it uses 1/16 PVC, it is not very heat resistant. Leaving it out in the sun for several hours a day has caused it to warp. I replaced it once with the PVC and one month later it started to warp and sag AGAIN.
So I did some research and had the material changed to 1/8 Lexan XL10. It cost me $60 (AHEM -Stratmosphere) and now have it on the car in the sun. It is harder to put on then the thinner PVC.
I will keep it on until TT-West where we can check for warpage under the warrm Las Vegas sun :-)
So I did some research and had the material changed to 1/8 Lexan XL10. It cost me $60 (AHEM -Stratmosphere) and now have it on the car in the sun. It is harder to put on then the thinner PVC.
I will keep it on until TT-West where we can check for warpage under the warrm Las Vegas sun :-)
Thread
Thread Starter
Forum
Replies
Last Post
R2.7TA6
New England Discussion
4
11-07-2007 03:25 AM
bitterchild
Mid Atlantic Discussion
0
06-14-2006 06:17 PM
Milpitas2.7T
S4 / RS4 (B5 Platform) Discussion
4
10-12-2005 08:12 AM
HedonismBot
A4 (B5 Platform) Discussion
1
04-14-2000 03:35 PM