adminisTerTurbo

cold

you have lots of room (1.5 inches maybe) to make it the way you want. this is where i liked mine for now. the alignment is still not perfect and may has some room for improvement.
<img src="http://pictureposter.audiworld.com/87367/dscn1047.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1048.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1049.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1050.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1051.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1052.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1053.jpg">





hot (the tips get dirty fast)

<img src="http://pictureposter.audiworld.com/87367/dscn1054.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1055.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1056.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1057.jpg">

<img src="http://pictureposter.audiworld.com/87367/dscn1058.jpg">

RoberTT-WWCD

Nice! Like your chioce of wheels...:-)

graysTT

What did you use to attach the front of the system to the cat pipe? I went with the original clamp and not the stepped down one they provided.

blackfnTTruck

gets broken in?

adminisTerTurbo

adminisTerTurbo

maybe the step down was for the 180's i'm not sure. seems like a perfect fit with the original clamp though. i'm still searching for a stainless clamp for the tip that's not welded on. i might just use a T clamp

adminisTerTurbo

but i could be wrong. it always goes back though

graysTT

Some people have had it tack welded, I was thinking about a couple of short stainless screws

TTinWV

Oooh, I like it.

TTschwing

Yup....stainless expands a lot with heat..