TT225 owners: looking for VAG-COM blocks '002 & '115
08-09-2010, 06:09 PM
#1
Audiworld Junior Member
Thread Starter
TT225 owners: looking for VAG-COM blocks '002 & '115
I have searched the internet extensively and cannot find an example of these VAG-COM blocks from chipped TT225 cars. I have a general sense of the performance levels but would greatly appreciate a log file or two so I can get a more concrete sense. TIA
08-27-2010, 02:56 AM
#3
AudiWorld Newcomer
Join Date: May 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
I attached a zip file with some logs from my an my friends TT 225 - both are remapped. There is block 003 (air mass meter) same in block 002 + some others as 115 aswell.
Hope it helps!
Dan
I attached a zip file with some logs from my an my friends TT 225 - both are remapped. There is block 003 (air mass meter) same in block 002 + some others as 115 aswell.
Hope it helps!
Dan
08-27-2010, 07:47 AM
#4
Audiworld Junior Member
Thread Starter
Thank you very much for your help with this! Really interesting info here.
Based on the boost actuals you were showing, the car was able to pass over 200g/s though the engine at under 1bar of boost. That shows how efficient the larger K04-20 turbine housing is.
I've never before seen a calculation for both hp and torque derived from the airflow numbers. Do you feel it's an accurate method, or was it simply a means for you to graphically compare various setups and cars?
Based on the boost actuals you were showing, the car was able to pass over 200g/s though the engine at under 1bar of boost. That shows how efficient the larger K04-20 turbine housing is.
I've never before seen a calculation for both hp and torque derived from the airflow numbers. Do you feel it's an accurate method, or was it simply a means for you to graphically compare various setups and cars?
08-27-2010, 11:39 AM
#5
AudiWorld Newcomer
Join Date: May 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Based on the boost actuals you were showing, the car was able to pass over 200g/s though the engine at under 1bar of boost. That shows how efficient the larger K04-20 turbine housing is.
I've never before seen a calculation for both hp and torque derived from the airflow numbers. Do you feel it's an accurate method, or was it simply a means for you to graphically compare various setups and cars?
There is also another calculation, please see attached file.
Dan
Thread
Thread Starter
Forum
Replies
Last Post
Dave_4
A4 (B5 Platform) Discussion
5
08-29-2002 08:59 PM
