ECU puts out 5V but sensor only getting 0.5V
#1
Audiworld Junior Member
Thread Starter
Join Date: May 2017
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
ECU puts out 5V but sensor only getting 0.5V
2008 A4 Quattro Cabriolet S-Line
ECU tested as good by SIA Electronics for $90.
Cam Position Sensor is not getting enough juice, so the engine remains in limp-home-mode.
What could be the problem?
My guesses:
1) Defective connector to ECU.
2) Ground problem in wiring harness
3) Wiring problem
4) Defective connector at Sensor.
What else should I explore?
What options do I have?
ECU tested as good by SIA Electronics for $90.
Cam Position Sensor is not getting enough juice, so the engine remains in limp-home-mode.
What could be the problem?
My guesses:
1) Defective connector to ECU.
2) Ground problem in wiring harness
3) Wiring problem
4) Defective connector at Sensor.
What else should I explore?
What options do I have?
Thread
Thread Starter
Forum
Replies
Last Post
INZAudi
A4 (B7 Platform) Discussion
0
11-16-2017 11:59 AM
wilson94t
S4 / RS4 (B5 Platform) Discussion
1
11-17-2009 12:58 PM
dtompsett
Audi Original "S" Cars
0
08-29-2006 02:39 PM
The Librarian
Audi Original "S" Cars
3
01-09-2006 03:00 PM
1.8tScreemer
A4 (B5 Platform) Discussion
0
02-03-2005 12:37 AM