EGR testing with VCDS - valve only opens a tiny bit!!!
08-24-2018, 11:58 PM
#1
AudiWorld Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
EGR testing with VCDS - valve only opens a tiny bit!!!
Hi guys
Audi A6 B6 2.0 tdi. I'm using 01 engine, 03 output tests.
I'm testing the egr valve. When I active it it only opens a little bit. I was expecting it to fully open 90 degree's, but no.
I got a brand new EGR valve and repeated this test, and again the brand new one only opens a little bit when activated by vcds.
Is it normal for this test (engine off btw) for the egr valve to only partially open?
Audi A6 B6 2.0 tdi. I'm using 01 engine, 03 output tests.
I'm testing the egr valve. When I active it it only opens a little bit. I was expecting it to fully open 90 degree's, but no.
I got a brand new EGR valve and repeated this test, and again the brand new one only opens a little bit when activated by vcds.
Is it normal for this test (engine off btw) for the egr valve to only partially open?
Thread
Thread Starter
Forum
Replies
Last Post
quicksilver 2.7
A6 / S6 (C5 Platform) Discussion
3
11-23-2009 05:56 PM
squrlathon
Audi 90 / 80 / Coupe quattro / Cabriolet
9
04-15-2002 02:46 PM