Is there a way to check just for what is throwing a CEL? Or.....
#1
Is there a way to check just for what is throwing a CEL? Or.....
do you need to just AUTOSCAN and try decide from the list of faults what would be throwing the CEL?
Im pretty new to vag com,
help is appreciated.
Mark
Im pretty new to vag com,
help is appreciated.
Mark
#2
Save the results of the Autoscan, clear the codes and then drive for a while.
Check again when the CEL re-appears.
If you have a Bentley, it ususally tells you which codes set which lights.
If you have a Bentley, it ususally tells you which codes set which lights.
#3
AudiWorld Senior Member
Join Date: Jun 2004
Location: Magdeburg, Germany
Posts: 1,675
Likes: 0
Received 0 Likes
on
0 Posts
Newer modules set a flag about which codes are actually triggering the MIL.
However when it comes to older cars or just in general there is not such a behavior. If in doubt scan the car and post your Auto-Scan here and we'll gladly take a look at it.
Thread
Thread Starter
Forum
Replies
Last Post
Ricerboy_408
S4 / RS4 (B5 Platform) Discussion
2
04-13-2011 11:25 AM
picoolo
A4 (B6 Platform) Discussion
2
08-12-2005 03:30 AM
Jason ESi-T
Audi 90 / 80 / Coupe quattro / Cabriolet
1
08-19-2003 03:28 PM