Tracking Down Vacuum "T" dimensions
#1
Audiworld Junior Member
Thread Starter
Join Date: Aug 2008
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Tracking Down Vacuum "T" dimensions
<center><img src="http://i171.photobucket.com/albums/u288/i0ls/vacroute.jpg"></center><p>i have a 1993 100cs quattro avant and i am trying to find the size of the vac t that comes off the valve cover and splits to the egr and vac booster.
i pulled one off a 95 a6 but it was smaller.
see picture below (sloppy red circle w/arrow marks the spot)
i pulled one off a 95 a6 but it was smaller.
see picture below (sloppy red circle w/arrow marks the spot)
#2
Audiworld Junior Member
Thread Starter
Join Date: Aug 2008
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tracking Down Vacuum "T" dimensions
ok what about a part number or anything that would help track down one of these.
i searched before posting this and came up with
3/8" ends and 1/4 or 1/8" center
but i am not sure if this in the newer style which is smaller than the one i need
i searched before posting this and came up with
3/8" ends and 1/4 or 1/8" center
but i am not sure if this in the newer style which is smaller than the one i need
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning-Audi
S4 (B8 Platform) Discussion
7
07-26-2018 02:02 PM
gruvenparts.com
A4 (B5 Platform) Discussion
19
10-11-2016 04:47 AM
ECS Tuning-Audi
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
3
02-04-2016 08:36 AM
Touge.ca
Canadian Discussion
1
10-18-2015 07:18 AM
pfgray2008
Q5/SQ5 MKI (8R) Discussion
6
10-01-2015 08:59 AM