Just thought I'd post my head pic here too . . .
10-28-2004, 08:26 AM
#7
Rest In Peace
Thread Starter
Join Date: Feb 2001
Posts: 25,366
Likes: 0
Received 0 Likes
on
0 Posts
Here is one post from the S4 forum
Basically trying to do all RS4 stuff . . .
Someone asked about ceramic coating so I took some more photos and posted this.
These parts are all sitting on my kitchen table so I haven't actually used any of this stuff yet but here's the idea.
We were trying to optimize each side of the air pump (engine). We wanted to keep the intake cool and the exhaust hot. We used two type of ceramic coatings. One is a dispersant coating trying to keep things cool and the other is a barrier coating trying to retain heat energy.
Here is a shot of the barrier coating applied to the stock exhaust manifold.
<img src="http://66.134.70.69/files/audi/Replika/124-2446_IMG.JPG">
The next shot of the turbo shows the barrier coating on the exhaust side and the dispersant coating in the compressor side.
<img src="http://66.134.70.69/files/audi/Replika/124-2448_IMG.JPG">
The entire exhaust side is coated trying to retain energy. Here is a down pipe.
<img src="http://66.134.70.69/files/audi/Replika/124-2416_IMG.JPG">
The intake manifold was cleaned up, intake bells were smoothed and then dispersant coated.
<img src="http://66.134.70.69/files/audi/Replika/124-2447_IMG.JPG">
Another turbo pic.
<img src="http://66.134.70.69/files/audi/Replika/124-2450_IMG.JPG">
And the whole reason we did all this was the heads.
<img src="http://66.134.70.69/files/audi/Replika/124-2411_IMG.JPG">
Exhaust side
<img src="http://66.134.70.69/files/audi/Replika/124-2409_IMG.JPG">
Someone asked about ceramic coating so I took some more photos and posted this.
These parts are all sitting on my kitchen table so I haven't actually used any of this stuff yet but here's the idea.
We were trying to optimize each side of the air pump (engine). We wanted to keep the intake cool and the exhaust hot. We used two type of ceramic coatings. One is a dispersant coating trying to keep things cool and the other is a barrier coating trying to retain heat energy.
Here is a shot of the barrier coating applied to the stock exhaust manifold.
<img src="http://66.134.70.69/files/audi/Replika/124-2446_IMG.JPG">
The next shot of the turbo shows the barrier coating on the exhaust side and the dispersant coating in the compressor side.
<img src="http://66.134.70.69/files/audi/Replika/124-2448_IMG.JPG">
The entire exhaust side is coated trying to retain energy. Here is a down pipe.
<img src="http://66.134.70.69/files/audi/Replika/124-2416_IMG.JPG">
The intake manifold was cleaned up, intake bells were smoothed and then dispersant coated.
<img src="http://66.134.70.69/files/audi/Replika/124-2447_IMG.JPG">
Another turbo pic.
<img src="http://66.134.70.69/files/audi/Replika/124-2450_IMG.JPG">
And the whole reason we did all this was the heads.
<img src="http://66.134.70.69/files/audi/Replika/124-2411_IMG.JPG">
Exhaust side
<img src="http://66.134.70.69/files/audi/Replika/124-2409_IMG.JPG">
Trending Topics
10-28-2004, 10:21 AM
#9
Rest In Peace
Thread Starter
Join Date: Feb 2001
Posts: 25,366
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I've basically been collecting parts for 3 years . . .
<center><img src="http://66.134.70.69/files/audi/KO4%20Conversion/engine%20removal/124-2444_IMG.JPG"></center><p>but now the engine is out and I'm getting ready to bolt up all this stuff
