When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good evening. My car is an Audi A4 B8.5 Allroad HCNHAQ1, 2.0 tdi s-tr 190 hp from 2015, with 80k km. paths
I have recently installed an H&R 290191-1 ring trim.
After installation, I realized that whoever sold it to me advised me badly, because despite the ring nut being pulled all the way up, the Allroad remains too low.
I often touch the belly of the car, especially in slopes, garage ramps that I have in my home, even the 245/40/19 tires also touch inside the wheel arches. The problem with all this I think is the load index of the kit that I mount the (29019-1) which is not correct
than what I should mount.
I'm also thinking of Bilstein b6 or b8 and related springs with a maximum lowering of 5 centimeters.
I await your welcome suggestions,
thank you. con kit h&R 29019-1 con kit h&R 29019-1 67 centimetri anteriore da terra a passaruota indici carico Allroad
Good evening. My car is an Audi A4 B8.5 Allroad HCNHAQ1, 2.0 tdi s-tr 190 hp from 2015, with 80k km. paths
I have recently installed an H&R 290191-1 ring trim.
After installation, I realized that whoever sold it to me advised me badly, because despite the ring nut being pulled all the way up, the Allroad remains too low.
I often touch the belly of the car, especially in slopes, garage ramps that I have in my home, even the 245/40/19 tires also touch inside the wheel arches. The problem with all this I think is the load index of the kit that I mount the (29019-1) which is not correct
than what I should mount.
I'm also thinking of Bilstein b6 or b8 and related springs with a maximum lowering of 5 centimeters.
I await your welcome suggestions,
thank you. con kit h&R 29019-1 con kit h&R 29019-1 67 centimetri anteriore da terra a passaruota indici carico Allroad