has anyone gotten a shop to machine a perch setting on your shocks?
#4
Should be ok...
as long as the shocks aren't overheated when the machining is done. That could damage the seals and require a rebuild.
I had a pair of Koni's machined. Shop charged me for their time...took a tad over an hour being very very careful.
Steve.
I had a pair of Koni's machined. Shop charged me for their time...took a tad over an hour being very very careful.
Steve.
#6
Oh, one other thing...
The ride height will not change the same amount as the new perch height. In my case, the ride height dropped about 1.0 inch for every 0.7 inch drop in perch height.
Steve.
Steve.
Trending Topics
#8
that's what i did
Had new grooves placed 1/4,1/2,and 3/4 above the stock perches and it's working great for me. have a little bit of adjustability w/out shelling out the $$ for coilovers.
Thread
Thread Starter
Forum
Replies
Last Post
GermanCarBuff
S4 / RS4 (B5 Platform) Discussion
1
02-14-2002 08:48 AM
CBH
Performance and Tuning
5
12-14-2000 11:10 AM