Repost: [BWW] I've collected the parts long enough, time to finally do the work. [BWW]
#1
AudiWorld Super User
Thread Starter
Repost: [BWW] I've collected the parts long enough, time to finally do the work. [BWW]
Here's a preview...
This is <a href="https://forums.audiworld.com/a4/msgs/2227504.phtml"><b>the link...</b></a>
Before:
<img src="http://images7.fotki.com/v134/photos/4/48510/1619277/P1010064-vi.jpg">
After:
<img src="http://images7.fotki.com/v136/photos/4/48510/1619277/PC180088-vi.jpg">
Andy
This is <a href="https://forums.audiworld.com/a4/msgs/2227504.phtml"><b>the link...</b></a>
Before:
<img src="http://images7.fotki.com/v134/photos/4/48510/1619277/P1010064-vi.jpg">
After:
<img src="http://images7.fotki.com/v136/photos/4/48510/1619277/PC180088-vi.jpg">
Andy
#4
looks great! one question
I've always been told that when the stickers are missing under hood, on our car found on the black plastic above the radiator, that the car has been in a front end colission and that has been replaced. your car looks amazing btw.
#5
AudiWorld Super User
Thread Starter
I don't know....
Could be that the '97 didn't have them to begin with, but I'm about 99.9% sure this car has never been in a major front end collision.
Andy
Andy
#6
nice post...questions....
the injector orings...how was that job? I already purchased the orings...just havent had the time. did you do anything to the orings while they were out?
BTW, ive been collecting parts as well. Here's my <a href="http://www.modifieda4.com/web/projects.html">planning page</a> Most of whats there has been completed...some things like the orings havent been done, but i have the parts.
BTW, ive been collecting parts as well. Here's my <a href="http://www.modifieda4.com/web/projects.html">planning page</a> Most of whats there has been completed...some things like the orings havent been done, but i have the parts.
#7
AudiWorld Super User
Thread Starter
Cake.
The o-ring at the top of the injector will roll off easy, with your hands. The one at the bottom however, I had to use a small snip to cut it off as I couldn't get it to roll over the end of the injector. Luckily, the new one rolled over the bottom without a problem--and don't forget to moisten the new o-rings with a bit of motor oil.