ThePiombino

I'm sure there is one somewhere on the forum, but I'll try this anyway. It's really A LOT easier done than said, and you'll realize that once you take the first one off. Basically what you want to do is slip a flathead screwdriver in the top slit closer to the middle of the car and gently pull down. As the tab inside the fog grilled disconnects from the inside of the bumper pull on the fog grille with one hand so it doesn't slip back on and take the other hand and pull on the bottom of the fog grille and sort of swing the fog grille off, away from the center of the car and towards the outside. There are two tabs on the extremem outsides of the fog grilles that almost act as hinges. Once you get the grille moving the rest is cake. Just make sure not to snap the tabs w/the screwdrivers and the rest will fall into place.

Snooky

thank you I'll give it a try, is it necessary to remove the fog grill when applying the chrome rings?

ThePiombino

Assuming you'll be using some sort of liquid adhesive, yes. If you're going to use some 3M double-sided trim tape then probably not.

victoorious

can anyone recommend a product for me to stick these on?