Coding for turning on Audi Active Lane Assist (all cars with pre sense)
#371
Audiworld Junior Member
Join Date: Feb 2017
Location: California
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I want to keep cost minimal. I purchased the OBDELEVEN but now need an android phone, where did you get the cheap $25 phone? and ideas which one will work for this. thanks!
#372
AudiWorld Member
I purchased the one recommended by Mitch and got it for $60 thru eBay (new), it is the BLU R1 HD. You can get it for $50 if you have Amazon Premier thru Amazon, otherwise regular price is $100 for non Premier customers.
#373
Still not got it working
I can only change 09 - Central Electrics using long coding:
Long coding
Control unit: 09 Central Electrics
Old value:
07501143E11800CD0104511858AE80F9100B31080000000000 00000000001A810A450122003200
New value:
07501143E11800CD0104511858AE80F9100B31080000000000 00000000001A810A450123003200
Mileage: 1006 km
Date: 2017-02-09 17:57
Can someone confirm this is correct?
I can only change 09 - Central Electrics using long coding:
Long coding
Control unit: 09 Central Electrics
Old value:
07501143E11800CD0104511858AE80F9100B31080000000000 00000000001A810A450122003200
New value:
07501143E11800CD0104511858AE80F9100B31080000000000 00000000001A810A450123003200
Mileage: 1006 km
Date: 2017-02-09 17:57
Can someone confirm this is correct?
#374
A galaxy s5 that I found at my parents house collecting dust works like a charm!
#375
#377
AudiWorld Senior Member
Thread Starter
#378
@Mitchfin thanks for your great effort, got laneassist working but i dont see it appear in my mmi or fis but i do see the small icon in my clock that its active.
looking to redo all settings and start over but i dont know the default of this adaption anymore:
Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15”
Could you check this one for me?
looking to redo all settings and start over but i dont know the default of this adaption anymore:
Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15”
Could you check this one for me?
#379
Nvm
@Mitchfin thanks for your great effort, got laneassist working but i dont see it appear in my mmi or fis but i do see the small icon in my clock that its active.
looking to redo all settings and start over but i dont know the default of this adaption anymore:
Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15”
Could you check this one for me?
looking to redo all settings and start over but i dont know the default of this adaption anymore:
Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15”
Could you check this one for me?
eading Control Config>heading_control Byte 35>Bit 0
realises pre sense faults which i cant remove. What is this setting for? If i dont set it the ALA also works.
#380
AudiWorld Senior Member
Thread Starter
hmmm, are you sure? It's what allows the camera to recognize lane markings