My A6 2.7T MTM (Tip) Dyno-results
05-12-2003, 09:09 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2002
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
My A6 2.7T MTM (Tip) Dyno-results
<center><img src="http://www.rs6.com/pics/Various/MTM-Rolling-Road-my-car.jpg"></center><p>What do you say?
A lot of loss. Only 188 hp at the wheels, that's over 35% loss...
Anyone has something similar to compare with?
Strip times at the bottom.
The car is an A6 2.7TQ Feb. 2002 with Tiptronic.
I want an RS6...
A lot of loss. Only 188 hp at the wheels, that's over 35% loss...
Anyone has something similar to compare with?
Strip times at the bottom.
The car is an A6 2.7TQ Feb. 2002 with Tiptronic.
I want an RS6...
05-12-2003, 10:06 AM
#3
Craggy Old Man
Join Date: Apr 2000
Posts: 10,643
Likes: 0
Received 0 Likes
on
0 Posts
A tip running Giac "S" chip and Tip chip(only mods) ran 14.024 at Carlsbad.
That would be the old 1 bar program.
I think the splits were
60',,,, 2.004
330',,, 5.86
1/8,,,, 9.004
1/4,,,,14.024
That was at sea level, 100 octane fuel, plus it ran 14.0 another 5-6 times so was consistent. I wonder if it was a little more aggressive??
I think the splits were
60',,,, 2.004
330',,, 5.86
1/8,,,, 9.004
1/4,,,,14.024
That was at sea level, 100 octane fuel, plus it ran 14.0 another 5-6 times so was consistent. I wonder if it was a little more aggressive??
Thread
Thread Starter
Forum
Replies
Last Post
oskidunker
A6 / S6 (C6 Platform) Discussion
7
03-19-2007 12:39 PM
Mr. Scary
A6 / S6 (C5 Platform) Discussion
4
11-01-2002 07:24 PM
