How to remove rear bumper from 2013 A8L?
Thread Starter
AudiWorld Junior Member
Joined: Apr 2017
Posts: 8
Likes: 0
How to remove rear bumper from 2013 A8L?
The Lane change sensor appears to have a cpu error, so I will need to get at it (located behind the rear bumper cover) to be able to replace it. I cannot find a DIY guide anywhere for this task. Can anyone help me out with how to remove it? Send me a link?
Thanks in advance...
2013 A8L
Thanks in advance...
2013 A8L
AudiWorld Super User
Joined: Oct 2001
Posts: 15,310
Likes: 696
From: SF Bay Area, CA
I don't have that info offhand, but are you sure the sensor is physically/electronically broken from whatever code you have? From what shops and dealers have told me, if a bumper cover is repainted or replaced, sensor may need to be recalibrate to deal with different paint thickness. That can cause errors too.
AudiWorld Senior Member
Joined: Dec 2006
Posts: 1,693
Likes: 10
pretty easy, i sort of did it. you pop out the tabs on the bottom portion by the exhaust tips (could be screws) and then in the rear wheel wells, there are another 3 (I think) screws that have to come out. I did it with the rear wheels on the car, but easier if they aren't. pulls right out then. just have a large blanket handy on the ground.
Thread
Thread Starter
Forum
Replies
Last Post
