BigMouse

<center><img src="http://twigmouse.ipupdater.com/miscpics/listpics.asp?a=dl&amp;ID=2145"></center><p>Well, after 1yr 3mos, I finally figured out a way to at least get that subaru outback bumper on there and looking decent. Much cutting, foaming, fiberglassing, sanding, and bondo'ing and it's presentable, although far from perfect. It does what I wanted it to do, hold those Hella 500's and have a spot for my intercooler. And it fits okay too. Anyway, the finish is still really rough, lots of scratch marks under the paint from coarse grit sandpaper, the whole thing needs to have glazing putty put all over it and be wet sanded to be perfect. There are also a few areas where the bondo cracked from the bumper flexing as it was installed. I'm going to leave it on the car for a while and hope that the bumper kinda 'takes' to the shape it's held into before I try to do any more filling. And with some higher quality filler. If I still like how this thing looks and fits after it's perfect, I might make a mold of it and do a lighter fiberglass version. Then I'd be able to make more if anyone here was interested.<ul><li><a href="http://twigmouse.ipupdater.com/miscpics/listpics.asp?dir=audi+stuff%5Csubaru+bumper">More pics</a></li></ul>

quattro.pilot

do I/we get to see this in person?

Ghostfire

Nice matching up the line from the wheel arch as well.

- GT Style -

<ul><li><a href="https://forums.audiworld.com/pacificnw/msgs/48898.phtml">https://forums.audiworld.com/pacificnw/msgs/48898.phtml</a</li></ul>

Regenmeister

Nice going Mouse.

Bubuski

Fit looks good. It does not even go lower than your rear bumper or rocker panel

RootMachine

looks nice, it would go well with a b4 hood and rs2 lights.

BigMouse

Certifit is only 3hrs away. I should look into it if it's only $80 for one.

quattro.pilot

yaa.. cheapyCheapy! =)