youdude

After STF's its obvious the stock Exhaust Manifold is extremely restrictive. Unfortunatly, after replacing my clutch my wallet thinned out, so i'm looking for a relatively cheap (I know urS4 and cheap=oxymoron) way to put a less restrictive EM without having to replace the entire exhaust system, if thats possible. I'm torn between an RS2 EM, or going the custom route. Is the rs2 Exhaust manifold optimum (considering price aswell) with the RS2 turbo?

Also if I get the 3" downpipe from the rs2 EM, would I have to replace the rest of my exhaust?
**Edit**
http://cgi.ebay.com/ebaymotors/AUDI-2-2L-20V-RS2-S2-S4-K26-EXHAUST-TURBO-MANIFOLD_W0QQcmdZViewItemQQcategoryZ33742QQihZ019Q QitemZ290104061541QQrdZ1QQsspagenameZWD1V

Too good to be true? or a POS replica?

4Driver4

Go RS2 manifold and stock exhaust. The gain from going 3 inch is marginal.

habe Ich gesagt

does anyone have dyno results to back this up ?

SilberUrS6

STFA.

SilberUrS6

You're RS2ed, IIRC.

Look for the p/n of the EM to verify.

STFA on eBay RS2 EMs.

|skolnick

Posted many times. Stromung gets you nothing except a new exhaust.

Zwoobah

and teh cool sound

SilberUrS6

But, if you go bigger than RS2, Stomung might be helpful.

UrS4boy

That eBay manifold is pretty but its C_R_A_P.

kinderutz

<ul><li><a href="http://cgi.ebay.de/TURBO-FACHER-KRUMMER-FUR-AUDI-S2-RS2-K24-K26-Lader_W0QQitemZ280071149804QQihZ018QQcategoryZ6141 0QQrdZ1QQssPageNameZWD1VQQcmdZViewItem">http://cgi.ebay.de/TURBO-FACHER-KRUMMER-FUR-AUDI-S2-RS2-K24-K26-Lader_W0QQitemZ