does anybody know of an all wheel dyno in the MA, RI area?
#1
does anybody know of an all wheel dyno in the MA, RI area?
finally got my 5000 turbo 10v running the way i like it, and would like to establish a baseline power and torque so i know what im dealing with here. not quite stock, so it wont be a true baseline, but one of the mods was necessary during the rebuilding of the top end. heres whats been done so far:
1. shaved .008" off the head so it will sit flush with the block
2. 2.0 bar computer chip and wastegate spring
3. replaced cracked factory coil with MSD blaster2
other then that, entire car is stock. pulls like crazy, and im really curious to see what shes puttin out for power and torque.
also, does anybody have a compression map for the k26 turbo?
thanks
Eric
1. shaved .008" off the head so it will sit flush with the block
2. 2.0 bar computer chip and wastegate spring
3. replaced cracked factory coil with MSD blaster2
other then that, entire car is stock. pulls like crazy, and im really curious to see what shes puttin out for power and torque.
also, does anybody have a compression map for the k26 turbo?
thanks
Eric
#2
Re: does anybody know of an all wheel dyno in the MA, RI area?
<center><img src="http://www.sjmautotechnik.com/parts_products/turbo/26.jpg"></center><p>Compressor map courtesy of sjmautotechnik.com.<ul><li><a href="https://forums.audiworld.com/newengland/">Ask here about a dyno.</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
mtl expos RIP
A4 (B5 Platform) Discussion
6
09-30-2004 01:52 AM
Xel
Audi Original "S" Cars
1
03-25-2003 06:56 PM
abcdefghijklmnop
A4 (B5 Platform) Discussion
3
11-14-2002 03:59 AM
JimmyKO
A4 (B5 Platform) Discussion
8
05-24-2001 04:40 PM