Edge Racing Bolts - Bad Stuff
#1
AudiWorld Super User
Thread Starter
Join Date: Mar 2000
Posts: 7,148
Likes: 0
Received 0 Likes
on
0 Posts
Edge Racing Bolts - Bad Stuff
<center><img src="http://pictureposter.audiworld.com/683/erbolts.jpg"></center><p>OK, I do not want to beat a dead horse. Some of you may have seen my post on how ER provided bolts are to short if you run a floating rotor such as StopTech. In addition to being too short these bolts are also cheap. Take a look at the picture.
The bolt on the right is the ER bolt that I had on my car for couple months. (I took them off today from the rear wheels.)
I replaced them with proper Dacromet coated bolts. I highly recommend that if you are running Flik wheels that you get bolts that match the quality of the wheel, not the cheap stuff that ER sent you.
E-mail me if you need a place to get good bolts.
Tomasz
The bolt on the right is the ER bolt that I had on my car for couple months. (I took them off today from the rear wheels.)
I replaced them with proper Dacromet coated bolts. I highly recommend that if you are running Flik wheels that you get bolts that match the quality of the wheel, not the cheap stuff that ER sent you.
E-mail me if you need a place to get good bolts.
Tomasz
#7
The Azenis / Flik held up on the way back.
On the Edgeracing site, it looks like the wheels are not in stock. I hope they get some more in soon. Oh well, I guess the Sportecs go back on until the next event. I was starting to get used to the lightweight feel and responsiveness of the Azenis and Lex's.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
UR-Idiot Savant-S6
Audi Original "S" Cars
9
04-10-2007 11:55 AM
DanosS4
S4 / RS4 (B5 Platform) Discussion
5
08-04-2004 07:12 AM
Trent
A4 (B5 Platform) Discussion
2
06-19-2003 10:22 AM
Alex C
Wheels & Tires Discussion
1
02-02-2001 11:54 PM