Fiberglass / CF / CK shops in the bay area?
#1
AudiWorld Super User
Thread Starter
Join Date: Nov 2003
Posts: 2,719
Likes: 0
Received 0 Likes
on
0 Posts
Fiberglass / CF / CK shops in the bay area?
Looking to have some pieces press molded and was looking for a good fiberglass, carbon fiber, or carbon kevlar shop in the area.
Large part manufacturing needed (4' by 4' roughly). I have the original I need duplicated in lighter materials. Thanks in advance!
Large part manufacturing needed (4' by 4' roughly). I have the original I need duplicated in lighter materials. Thanks in advance!
#2
I've been looking a while ourselves and haven't found someone. It seems that
with the Boeing and Airbus jets, as well as the military, CF and Kevlar are much harder to get - and expensive. Especially larger stuff - and even more so, the stronger unchopped or show quality stuff.
For example: ordering factory carbon sideblades for the R8 will delay your order - and the aftermarket ones are many times the cost of course.
We've been waiting 8 months for a center console for our Ferrari - the guy who makes them, says he can't get quality carbon for the larger items. He has to travel to the supplier and hand pick each roll to ensure he gets quality - and since he's small potatoes, he isn't at the top of their list.
We've been at our race car project a while, and one thing we need is fiberglass copies of the box fender flares made. A couple of fiberglass guys have flaked, and other want only volume jobs. We may have found one, but nothing has been delivered yet, so no idea on timelines or quality.
We also tried getting CF hoods made, but even with an order of 10, that wasn't enough promise of volume for shops that have a reputation for good work. They wouldn't do it for any price, given how much time and room it takes. Little stuff, yeah.
You might want to check the LA/OC area. There is usually far greater scope there.
For example: ordering factory carbon sideblades for the R8 will delay your order - and the aftermarket ones are many times the cost of course.
We've been waiting 8 months for a center console for our Ferrari - the guy who makes them, says he can't get quality carbon for the larger items. He has to travel to the supplier and hand pick each roll to ensure he gets quality - and since he's small potatoes, he isn't at the top of their list.
We've been at our race car project a while, and one thing we need is fiberglass copies of the box fender flares made. A couple of fiberglass guys have flaked, and other want only volume jobs. We may have found one, but nothing has been delivered yet, so no idea on timelines or quality.
We also tried getting CF hoods made, but even with an order of 10, that wasn't enough promise of volume for shops that have a reputation for good work. They wouldn't do it for any price, given how much time and room it takes. Little stuff, yeah.
You might want to check the LA/OC area. There is usually far greater scope there.
Thread
Thread Starter
Forum
Replies
Last Post
d0nut s4
Parts For Sale - Archive (NO NEW POSTS HERE)
7
02-11-2016 04:48 AM
3cyl
Parts For Sale - Archive (NO NEW POSTS HERE)
5
10-19-2015 04:51 PM
powerplyer
A8 / S8 (D4 Platform) Discussion
0
09-17-2015 06:26 PM
mroberte
Audi A3 / S3 / RS 3 MKII
3
09-12-2015 11:14 PM