S4 / RS4 (B5 Platform) Discussion Discussion forum for the B5 Audi S4 & RS4 produced from 1998-2002

oil change, trans fluid change, full fluids inspection, brake fluid flush on a GT3 cup car...

Thread Tools
 
Search this Thread
 
Old 04-24-2006, 03:53 PM
  #1  
Junior Member
Thread Starter
 
Snow Trooper= Sa'tin's Avatar
 
Join Date: Feb 2006
Posts: 1,355
Likes: 0
Received 0 Likes on 0 Posts
Default oil change, trans fluid change, full fluids inspection, brake fluid flush on a GT3 cup car...

plus new rotors, pads and lines along with a nice detail and a oil change and wash for his wifes 996 gt2 daily driver because the owner is cool like that =

<img src="http://pictureposter.audiworld.com/104363/kishkash.jpg">


audi content- this is the reason i even get out of bed on mondays, i need to afford supporting mods to reach my 40 psi through redline goal :P
Old 04-24-2006, 03:55 PM
  #2  
AudiWorld Super User
 
Imolavirus@BuehnEngineering's Avatar
 
Join Date: Mar 2002
Posts: 17,933
Likes: 0
Received 0 Likes on 0 Posts
Default

you got that for doing that?!?!?!?!
Old 04-24-2006, 03:55 PM
  #3  
Junior Member
Thread Starter
 
Snow Trooper= Sa'tin's Avatar
 
Join Date: Feb 2006
Posts: 1,355
Likes: 0
Received 0 Likes on 0 Posts
Default

i told you he was a rich mother f-er
Old 04-24-2006, 03:56 PM
  #4  
AudiWorld Expert
 
Captain Matt, I be's Avatar
 
Join Date: Oct 2001
Posts: 32,063
Likes: 0
Received 2 Likes on 2 Posts
Default

nice. 40psi through redline sounds fun.
Old 04-24-2006, 03:57 PM
  #5  
AudiWorld Super User
 
Illusive90S's Avatar
 
Join Date: Apr 2002
Posts: 2,426
Likes: 0
Received 0 Likes on 0 Posts
Default

I see $3,100...I would have charged double! :-P
Old 04-24-2006, 03:57 PM
  #6  
Junior Member
Thread Starter
 
Snow Trooper= Sa'tin's Avatar
 
Join Date: Feb 2006
Posts: 1,355
Likes: 0
Received 0 Likes on 0 Posts
Default all i need are the turbos, some machine work on the heads and block (o-rings) and i am ready

all other parts are basically in my hands
Old 04-24-2006, 04:00 PM
  #7  
Junior Member
Thread Starter
 
Snow Trooper= Sa'tin's Avatar
 
Join Date: Feb 2006
Posts: 1,355
Likes: 0
Received 0 Likes on 0 Posts
Default you are close a little low

part of it was for some fab work i did a few days ago for him also, but not much.

sad thing is, i still charge less than what many shops would charge fore the work. i did spend a solid 4 hours just checking every little bolt and nut that i can get to and checking/ replacing safety wires and tq spec checking on a lot of stuff
kinda stressfull
Old 04-24-2006, 04:01 PM
  #8  
AudiWorld Senior Member
 
EricVonHa's Avatar
 
Join Date: Oct 2003
Location: PA Philly Region
Posts: 786
Likes: 0
Received 0 Likes on 0 Posts
Default

When the ceramic rotors cost $1500 per corner... you made about $20 bux an hour !
Old 04-24-2006, 04:03 PM
  #9  
Junior Member
Thread Starter
 
Snow Trooper= Sa'tin's Avatar
 
Join Date: Feb 2006
Posts: 1,355
Likes: 0
Received 0 Likes on 0 Posts
Default customer supplied parts, he gets them from porsche directly as far as i know

the boxes sure are nice
Old 04-24-2006, 04:09 PM
  #10  
AudiWorld Super User
 
BrokenRocket's Avatar
 
Join Date: Sep 2004
Posts: 9,538
Likes: 0
Received 0 Likes on 0 Posts
Default

AudiWorld Ballars.


Quick Reply: oil change, trans fluid change, full fluids inspection, brake fluid flush on a GT3 cup car...



All times are GMT -8. The time now is 03:22 PM.