SinChar

(first, the car IS NOT lowered, nor has it ever been.)
well, i got the car used about 5000 miles ago. the tires were pretty worn out then, BUT i also noticed the inner tread of all tires to be worn out excessively. since i bought the car i was running 40 psi F/R on those tires. i'm can't tell if the inner tread has been wearing quicker.

i'm ready to change the tires...and i'm just wondering WHAT PRESSURE SHOULD I RUN to ensure i don't wear the inner tread of the tires??? (38-40 psi OK?)

also, anyone have any ideas as to why the tires were worn on the inside???...too low/high pressure?

TIA

Lehigh

you need an alignment done. and 40psi is too much for the stock size tires.

SinChar

so, what is a good tire pressure for street ???

Bryce

Depends on the tire. My P6000s are 51 max. So 40 is low..

ryans4

I disagree, i have stock RE040's and I run 42F/40R pressure and it's perfect...

Nogaro

And does this happen to all 4 wheels?

If yes.. you are lucky!! You got a car with a track ready camber setting =P