36valves

<center><img src="http://pictureposter.audiworld.com/41218/s4_06.jpg"></center><p>Has anyone had any rust problem after cutting the slot in the rear uprights for the damper adjustment?

The shop installed them said they put primer on the cut area, but they look shinny like a fresh cut. What kind of primer do you guys recommend? I do live in the snow belt, hate to see that area rust!

Thanks in advance!!

dscottjr

i just used some rust-o-leum flat black i think.. any rust inhibiting primer will work.

DeutschDriver

can you post a photo of the "window" they cut in the uprights? thanks!

36valves

<center><img src="http://pictureposter.audiworld.com/41218/106-0601_img.jpg"></center><p>

DeutschDriver

anyone know if thats the same window that would be cut for the avant? any cover for weather?

Jeff Vader - boscoj

well there you go, a room with a view . . . you should paint those . . .

Jeff Vader - boscoj

Avant is no different. You could tape it I guess . . .

Nick Gustas

Rustoleum and duct tape are your friends. Make sure the tape wraps around the sides so it stays put.

DeutschDriver

what tool did you use to cut the window?

Nick Gustas

Hal did it while I worked on the fronts, dremel and a drill I think?