Timing Belt replacement uncovered something very strange/interesting/disturbing
#15
the pins in the cam bar..if anything is off is the way the cams were put in (aligned)
not the way the cams were cut ..and it was more like 1/2 toth off ..since the cam gears don't have a ceratin position on the cam shafts. that's why alinging the lobes on the camshaft (the 2 flat spots on the cams must face eachother) using the bar (one position - big holes inwards) and having the pin (only one spot will go into-TCD) there is no way that is not TCD .. unless they - AUDI cut/machined the crank and the cams all wrong.
(see you later today sir).
(see you later today sir).
Thread
Thread Starter
Forum
Replies
Last Post
A4Dog
A4 (B6 Platform) Discussion
10
10-09-2008 07:44 PM
amiro
A4 (B5 Platform) Discussion
2
09-29-2003 09:19 PM
drewsQ
Audi 90 / 80 / Coupe quattro / Cabriolet
19
12-19-2002 02:18 PM