Turbo timers vs keyless entry... Ways to bypass?
#1
AudiWorld Senior Member
Thread Starter
Join Date: Sep 2005
Posts: 1,394
Likes: 0
Received 0 Likes
on
0 Posts
Turbo timers vs keyless entry... Ways to bypass?
Since the car is still running when you take the key out, the keyless lock is disabled. Is there a way to mod the system so as to allow keyless control while the car is still on?
I searched already... Wasn't sure what to look for specifically.
TIA!
I searched already... Wasn't sure what to look for specifically.
TIA!
#3
I did it this way. Easiest I think.
Check out my post #12.
instructions I had seen had suggested tapping into one of the wires behind the fuse box. I couldn't find and, and after some thinking I figured out that doing what I did accomplished the same thing, and eliminated the chance of tapping the wrong wire, or cutting it completely. Works flawlessly.<ul><li><a href="http://audizine.com/forum/showthread.php?t=57807">http://audizine.com/forum/showthread.php?t=57807</a</li></ul>
instructions I had seen had suggested tapping into one of the wires behind the fuse box. I couldn't find and, and after some thinking I figured out that doing what I did accomplished the same thing, and eliminated the chance of tapping the wrong wire, or cutting it completely. Works flawlessly.<ul><li><a href="http://audizine.com/forum/showthread.php?t=57807">http://audizine.com/forum/showthread.php?t=57807</a</li></ul>
#4
AudiWorld Senior Member
Thread Starter
Join Date: Sep 2005
Posts: 1,394
Likes: 0
Received 0 Likes
on
0 Posts
Interesting... I have a GReddy TT; is yours an Apex?
I'm not sure which wire is the 'security wire'... What function does it serve on yours?
The GReddy has five wires:
-Main power
-Switched power
-Ignition
-Speedometer in
-Emergency brake
...E-brake cuts the timer if the signal to the wire is cut.
The GReddy has five wires:
-Main power
-Switched power
-Ignition
-Speedometer in
-Emergency brake
...E-brake cuts the timer if the signal to the wire is cut.
Trending Topics
#10
its easy, i used a writeup that told me how to re-wire the locking and alarm system to the constant
on source instead the momentary, so that i can activate the alarm ,and lock/unlock while the car is still running..
umm search in the tech articles for turbo timer install..
umm search in the tech articles for turbo timer install..