07' VW Rabbit exhaust photos from this weekend>
#1
AudiWorld Senior Member
Thread Starter
07' VW Rabbit exhaust photos from this weekend>
My good friend Hassan converted his standard rabbit rear end (tips on the left, there is one photo of it) to a R32 rear end. We grabbe a set of tips and had a shop do the work. I do have a welder but I think in the end it was less of a headache to go there and we got it just how we wanted it too, cheap! : )
His plan is to have the reflector holes filled and have it painted this coming week. Just wanted to get a good fit and good exhaust tip setup first.
The exhaust is a 3" in/out Y pipe to two 4" diameter resonated tips & what seems like 2.5" moving air space in them after the insulation.
He plans on doing the C2 motorsports turbo kit that I am linking below. Any input is great! I told him to save up and get the full NGK & C2 "stage 3 kit" which includes a built motor & clutch upgrade. Figure do it all right off the bat but he wants to get it sooner than later so I think he is going for C2 stage 2 kit for the kickin rabbit.
en
enf of story. photos.
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_5.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_5.jpg" border="0" alt="Photobucket"></a>
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_1.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_1.jpg" border="0" alt="Photobucket"></a>
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_2.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_2.jpg" border="0" alt="Photobucket"></a>
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_3.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_3.jpg" border="0" alt="Photobucket"></a>
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_4.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_4.jpg" border="0" alt="Photobucket"></a><ul><li><a href="https://www.c2motorsports.net/shop/p-154-stage-2.aspx">C2 Motorsports "Stage 2" VW Rabbit/Jetta 2.5l 5cyn turbo kit...</a></li></ul>
His plan is to have the reflector holes filled and have it painted this coming week. Just wanted to get a good fit and good exhaust tip setup first.
The exhaust is a 3" in/out Y pipe to two 4" diameter resonated tips & what seems like 2.5" moving air space in them after the insulation.
He plans on doing the C2 motorsports turbo kit that I am linking below. Any input is great! I told him to save up and get the full NGK & C2 "stage 3 kit" which includes a built motor & clutch upgrade. Figure do it all right off the bat but he wants to get it sooner than later so I think he is going for C2 stage 2 kit for the kickin rabbit.
en
enf of story. photos.
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_5.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_5.jpg" border="0" alt="Photobucket"></a>
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_1.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_1.jpg" border="0" alt="Photobucket"></a>
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_2.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_2.jpg" border="0" alt="Photobucket"></a>
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_3.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_3.jpg" border="0" alt="Photobucket"></a>
<a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view¤t=TEMP-Image_1_4.jpg" target="_blank"><img src="http://i8.photobucket.com/albums/a44/godsphantasma/TEMP-Image_1_4.jpg" border="0" alt="Photobucket"></a><ul><li><a href="https://www.c2motorsports.net/shop/p-154-stage-2.aspx">C2 Motorsports "Stage 2" VW Rabbit/Jetta 2.5l 5cyn turbo kit...</a></li></ul>
#3
[scratches head]
Did you get this from kaleco auto?<ul><li><a href="http://s8.photobucket.com/albums/a44/godsphantasma/?action=view&current=TEMP-Image_1_3.jpg">http://s8.photobucket.com/albums/a44/godsphantasma/?action=view&current=TEMP-Image_1_3.jpg</a</li></ul>
Trending Topics
#9
AudiWorld Senior Member
Thread Starter
Negative, pieced it together from S&K Speed as well as some Audio store >>
IDK but total cost all in all welds, parts, bumper was like 600 bucks. I would have just got a turboback 3" and done something custom that involves cutting up that nice stock bumper he's got and putting on like quad tips but much wider from each other...
idea's idea's!
idea's idea's!
Thread
Thread Starter
Forum
Replies
Last Post
Kislev
Parts For Sale - Archive (NO NEW POSTS HERE)
0
08-22-2017 03:18 PM
brokerjoe
A6 / S6 (C6 Platform) Discussion
16
12-19-2006 07:22 AM
InnyAudi
A6 / S6 (C5 Platform) Discussion
10
09-08-2006 12:24 PM