Total ricer move.
#1
AudiWorld Senior Member
Thread Starter
Join Date: Dec 2005
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Total ricer move.
I was bored tonight and did some reading...
I took off my airbox, I was sort of curious where the MAF sensor was, so I unscrewed it from the airbox...
I jammed the MAF into a K&N filter and took her for a spin.
She indeed was much louder... I felt bad so I took the ghetto rig off and put the airbox back in.
Whats that little tube connected to the bottom left side of the airbox? felt around inside of it and it was clean so I'm guessing it just sucks in fresh air?!
Anyway, if you're bored it took me like 10 minutes and it sounded sort of need. My friend and I drove around calling it the grey firebreathing dragon.
Goodnight everyone!
(Can't wait to get a modshack intake)
I took off my airbox, I was sort of curious where the MAF sensor was, so I unscrewed it from the airbox...
I jammed the MAF into a K&N filter and took her for a spin.
She indeed was much louder... I felt bad so I took the ghetto rig off and put the airbox back in.
Whats that little tube connected to the bottom left side of the airbox? felt around inside of it and it was clean so I'm guessing it just sucks in fresh air?!
Anyway, if you're bored it took me like 10 minutes and it sounded sort of need. My friend and I drove around calling it the grey firebreathing dragon.
Goodnight everyone!
(Can't wait to get a modshack intake)
#5
AudiWorld Senior Member
Thread Starter
Join Date: Dec 2005
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Re: I modified my airbox to breathe better
Did you drill the holes in the bottom of the airbox?
I know thats a dumb question but I saw a "how to" online where the idiot drilled in the path of already filtered air...
anyway... do you like the sound of it? How big were the holes you drilled?
I may do that until I get the modshack intake.
I know thats a dumb question but I saw a "how to" online where the idiot drilled in the path of already filtered air...
anyway... do you like the sound of it? How big were the holes you drilled?
I may do that until I get the modshack intake.
#6
heres a pic...
<center><img src="http://www.reimundez.com/vwmods/images/07SwissCheesedAirboxInCar.jpg"></center><p>THIS IS NOT MINE, but mine looks similar(not quite a swiss cheesed), I tried to keep the holes toward the side of the fender, away from the turbo.
Definitely increased the sound and from a comparo test a few months back, it should have flow similar to the modshck rig...of course the temps will not be as low as with a modshack but I am happy with it.
Definitely increased the sound and from a comparo test a few months back, it should have flow similar to the modshck rig...of course the temps will not be as low as with a modshack but I am happy with it.
#7
AudiWorld Senior Member
Thread Starter
Join Date: Dec 2005
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Re: heres a pic...
Thanks for the picture...
If its all covered up I guess it would be pretty nice. Is it much louder than just putting a filter right on the MAF?
If its all covered up I guess it would be pretty nice. Is it much louder than just putting a filter right on the MAF?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
B7S4Audi
30v V6 Discussion
8
01-16-2007 09:56 AM
Snopyro
Audi 90 / 80 / Coupe quattro / Cabriolet
13
05-11-2006 10:48 PM
canta4dit
12v V6 Discussion
12
03-18-2004 02:35 PM
TwnTrbo
S4 / RS4 (B5 Platform) Discussion
5
07-24-2003 09:52 AM