2017 A4 coding tweaks
#671
Audiworld Junior Member
Join Date: Dec 2016
Location: Melbourne, Aus
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
This worked for me to disable auto start/stop in my Q7:
Module 08/Air Conditioning
Adaptation
A/C comfort param for start/stop function
Old value: 5
New value: 0
With this setting, start/stop never engaged unless HVAC was turned completely off. I did the mod with OBDeleven. I don't know about VCDS and your cable.
In the Q7, there is no button for hill hold assist. You just set the parking brake and when you press the accelerator to drive away, the parking brake goes off on its own. Don't know if it's the same in the A4.
Module 08/Air Conditioning
Adaptation
A/C comfort param for start/stop function
Old value: 5
New value: 0
With this setting, start/stop never engaged unless HVAC was turned completely off. I did the mod with OBDeleven. I don't know about VCDS and your cable.
In the Q7, there is no button for hill hold assist. You just set the parking brake and when you press the accelerator to drive away, the parking brake goes off on its own. Don't know if it's the same in the A4.
Last edited by TrickeyA4B9; 02-13-2017 at 12:29 AM.
#672
Next I want to try to show the navigation map in the driver information display. I have the smaller MMI version and the color information display. Based on the coding below it should work. However it conintues to show the compass or the navigation arrows when a waypoint has been set.
Also, after the coding below, the google earth maps functionality does not work anymore. On the MMI I see the progress bar for Google earth filling up untill is completed filled, but it stays like this and the Google earth overlay is not shown. For now, I have reverted back the changes, and the Google earth overlay is working again. But I still would like to get the navigation map to be shown in the driver information system.
[VO] _Dashboard_Display_Configuration (RDID $ 0B5A)
[LO] _navigation_map_transmission_mode -> [VO] _MOST_Streaming
[LO] _navigation_map_compression_mode -> [VO] _H264
[LO] _navigation_map_Resolution -> [VO] _resolution_1
#673
AudiWorld Member
I found myself coding back to original settings the following items:
1. Lane Assist: find it too intrusive, always trying to correct the car.
2. Auto on/off: when turning off the A/C the car would shut off eventually, so I prefer to practice the common pressing of the physical button when starting the car and forget about it.
1. Lane Assist: find it too intrusive, always trying to correct the car.
2. Auto on/off: when turning off the A/C the car would shut off eventually, so I prefer to practice the common pressing of the physical button when starting the car and forget about it.
#674
1. Even when you change the setting in MMI to late interference?
2. I will probarly never turn of the A/C, but still I hope we can find a setting to disable start/stop directly.
2. I will probarly never turn of the A/C, but still I hope we can find a setting to disable start/stop directly.
#675
AudiWorld Member
#676
AudiWorld Senior Member
I found myself coding back to original settings the following items:
1. Lane Assist: find it too intrusive, always trying to correct the car.
2. Auto on/off: when turning off the A/C the car would shut off eventually, so I prefer to practice the common pressing of the physical button when starting the car and forget about it.
1. Lane Assist: find it too intrusive, always trying to correct the car.
2. Auto on/off: when turning off the A/C the car would shut off eventually, so I prefer to practice the common pressing of the physical button when starting the car and forget about it.
#679
coding for displaying map in FISs non mmi plus
I've found this somewhere:
Adaptation
[VO] _Dashboard_Display_Configuration (RDID $ 0B5A)
[LO] _navigation_map_transmission_mode -> [VO] _MOST_Streaming
[LO] _navigation_map_compression_mode -> [VO] _H264
[LO] _navigation_map_Resolution -> [VO] _resolution_1
However, the MuFuPlus steering wheel must be installed so that the view can be changed to the FIS on the map.
Coding probably synonymous with OBDeleven
-------------
has anyone actually tried to get this to work? result should be that the navimap can be displayed in the front information system without the need for mmi+
Activate map display in the FIS with a small MMI
STG 5F Information electronics 1Adaptation
[VO] _Dashboard_Display_Configuration (RDID $ 0B5A)
[LO] _navigation_map_transmission_mode -> [VO] _MOST_Streaming
[LO] _navigation_map_compression_mode -> [VO] _H264
[LO] _navigation_map_Resolution -> [VO] _resolution_1
However, the MuFuPlus steering wheel must be installed so that the view can be changed to the FIS on the map.
Coding probably synonymous with OBDeleven
-------------
has anyone actually tried to get this to work? result should be that the navimap can be displayed in the front information system without the need for mmi+