When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Spent most of today gluing the headliner and cutting out the holes. It's more tedious than you'd expect, and I see many people recommend 3M 74 - I've been using 3M 90. A few minor mistakes, the worst one being that I forgot to factor in the little notch going up to the sunroof, so there are a few (barely) visible cuts. I'm also going to reglue the areas on the side of the sunroof hole as the glue did not stick well here, and the little indents by the sun visors also need a little bit of glue. However I believe that I've managed to do a pretty good job. The shade difference between the old and new fabric is visible so I think I'll reupholster the sunroof panel as well. I've run out of glue (I've used 2 cans!) but I've ordered more as no store in my home town carries it, hopefully I'll be able to finish it up by next week.
So last update, I ended up regluing the headliner in some areas as it wasn't sticking properly. All in all it turned out really well minus the aforementioned cuts, but I will just patch up these, they are not very visible inside. I also reupholstered the sunroof panel.
05-27-2023, 12:31 PM
