03AR2rescu

I swapped out the 710B's for 710N's last night and have a couple questions.

First, the vacuum hoses are different. Pass side is a thick rubber one. Drivers side is a thiner rubber one with a cloth sheath. I found that strange, and the fabric one was a it harder to put back on without tearing at the fabric.

Secondly, after the install, everything seems to be fine, but when I lock the car now it just locks. The flashing lights and beep are gone. I'm not sure how that could've happened since I didn't deal with any electricals. And it still flashes and beeps when I unlock the doors.

Any ideas?

Also, any interest for a write-up. I took some pictures.

xtreetoes

You have an open door someplace.

grey-2002-ar-6sp

:-D

As xtreetoes says, you have an open door somewhere. Open and slam all the doors, and then try relocking.

gragravar

or maybe even the hood not closed completely

03AR2rescu

ding ding. We have a winner. I feel dumb now.

gragravar

to be able to post the idea.

when I did that, I was impressed that the hood latch was integrated into the alarm.

alrightroad

This needs to go on the FAQ site as owner triva! UBER, trivia section???

tazerproof

for the first time