AudiWorld Forums

Audi Q8 Discussion forums for the Audi Q8 SUVs

Q8 - OBDEleven

Thread Tools
 
Search this Thread
 
Old 11-30-2023, 08:48 PM
  #1101  
Club AutoUnion
 
Chopper60's Avatar
 
Join Date: Nov 2023
Location: Gatlinburg, TN
Posts: 31
Received 3 Likes on 3 Posts
Default
Originally Posted by JazziNva
Unfortunately my OBDeleven is on the way back to Amazon. I tried earlier in the week to use the one-click 'apps'. None of them worked, receiving the 'check ignition and try again' error message. Yesterday I found online several adaptations that would accomplish the same things I initially wanted. None of them worked, at least before I gave up and quit trying. After 'applying' the adaptation I got the 'writing' message and the spinning ball. This went on for 15-20 minutes. I tried again, same result. Maybe I'm too impatient, but I would think it could write the change in less than 20 minutes. If anyone can get OBDeleven to work on a late-2023 build, I'd be happy to buy another, but so far I've had no luck.
From OBDeleven

Chopper60 is offline  
Reply Like
Old 12-01-2023, 07:01 AM
  #1102  
AudiWorld Junior Member
 
Mark Imanuel's Avatar
 
Join Date: May 2020
Posts: 33
Likes: 0
Received 4 Likes on 4 Posts
Default
It worked on my '23 SQ8, picked up the car end of Jan '23
Mark Imanuel is offline  
Reply Like
Old 12-01-2023, 07:24 AM
  #1103  
AudiWorld Member
 
Farmer Harv's Avatar
 
Join Date: Oct 2019
Location: Saskatchewan, Canada
Posts: 70
Received 24 Likes on 17 Posts
Default
Yes, it works on early 23 builds - Jan to August.

Does not work on late 23 builds - August onwards.

Apparently the way to distinguish between the two is if your car has the new advanced driver assistance display OBDeleven will Not work at this time.
Farmer Harv is offline  
Reply Like
Old 12-01-2023, 08:35 AM
  #1104  
Club AutoUnion
 
Mrclopec's Avatar
 
Join Date: Feb 2011
Location: Nipomo, CA
Posts: 629
Received 83 Likes on 57 Posts
Default
@Farmer Harv Does your car have PR Code NI9?

Reference: PR no. NI9 - With UNECE Cyber Security & Software Updates for countries without UNECE
Mrclopec is offline  
Reply Like
Old 12-01-2023, 09:30 AM
  #1105  
AudiWorld Member
 
Farmer Harv's Avatar
 
Join Date: Oct 2019
Location: Saskatchewan, Canada
Posts: 70
Received 24 Likes on 17 Posts
Default
Originally Posted by Mrclopec
How do we find that info? I've attempted to get a build sheet through Audi Canada twice with no luck, and I cannot find the sticker with installed options anywhere in/on the car either.
Farmer Harv is offline  
Reply Like
Old 12-01-2023, 12:09 PM
  #1106  
Club AutoUnion
 
Mrclopec's Avatar
 
Join Date: Feb 2011
Location: Nipomo, CA
Posts: 629
Received 83 Likes on 57 Posts
Default
Originally Posted by Farmer Harv
How do we find that info? I've attempted to get a build sheet through Audi Canada twice with no luck, and I cannot find the sticker with installed options anywhere in/on the car either.
You should be able to access this information from Audi’s Erwin site. A day subscription might be required. At the very least, any service advisor should be able to print out the Vehicle Specific Information sheet with a listing of all PR codes for your car. When we took delivery of our car, the usual PR stickers you would find in the trunk and the manual were still attached to their paper backings meaning they are typically attached to the car during dealer PDI. If yours aren’t floating around in your spare tire area or under the back seat anywhere, then unfortunately they might have been tossed during dealer prep. I would be VERY surprised if that happened though.
Mrclopec is offline  
Reply Like
Old 12-01-2023, 12:25 PM
  #1107  
AudiWorld Senior Member
 
1stRS's Avatar
 
Join Date: May 2020
Location: COLORFUL
Posts: 959
Received 202 Likes on 160 Posts
Default
bummer, he can’t do it anymore.

This guy will decode your VIN for you. It’s how I got my sheet.

https://www.audiworld.com/forums/a8-.../#post25857472
1stRS is offline  
Reply Like
Old 12-01-2023, 01:17 PM
  #1108  
Club AutoUnion
 
Chopper60's Avatar
 
Join Date: Nov 2023
Location: Gatlinburg, TN
Posts: 31
Received 3 Likes on 3 Posts
Default
Originally Posted by Mrclopec
24 RSQ8 build date 9/23. I have the new advanced driver assistance display. Dealer must have tossed the PR codes but this shows up in the Audi app. There is no other reference to it in the optional section.

I ordered the OBD11 so I’ll know Sunday or Monday if it works. @Farmer Harv is yours an S8 or RSQ8. I’m praying this thing will work lol.


Chopper60 is offline  
Reply Like
Old 12-01-2023, 02:05 PM
  #1109  
Club AutoUnion
 
Chopper60's Avatar
 
Join Date: Nov 2023
Location: Gatlinburg, TN
Posts: 31
Received 3 Likes on 3 Posts
Default
Update: Went on the Audi Erwin page and bought the day pass. The app is correct. I do have the
NI8 Without UNECE CS (R155) and SU (R166) with protection of vehicle diagnostic PVD2 control module.

So I’m not sure what’s going to happen.
Chopper60 is offline  
Reply Like
Old 12-01-2023, 02:36 PM
  #1110  
AudiWorld Member
 
Farmer Harv's Avatar
 
Join Date: Oct 2019
Location: Saskatchewan, Canada
Posts: 70
Received 24 Likes on 17 Posts
Default
Ok, so I got the dealership to email me my vehicle info sheet. Amongst the 202 different PR codes I found:

Code: NI8
Origin: L
Family: ECE
Description: Without UNECE CS (R155) and SU (R156) with Protection of Vehicle Diagnostics PVD2 control module

There are no other NI* PR codes, just the NI8

Production date is Aug 22, 2023.
Farmer Harv is offline  
Reply Like



Advanced Search
Quick Reply: Q8 - OBDEleven


Reply Closed Thread Share

All times are GMT -8. The time now is 08:09 AM.