1.8T engine differences ??
#1
1.8T engine differences ??
I have a 2001, 225HP TT (a rebuildable car) that a connecting rod get out of the engine block ! Can I replace the block by any other 1.8T ? Is there any differences (in the motor itself)between the 180 and 225 Hp or with Golf/Jetta ?? Components, support compression ratios... ??
Thanks a lot, John
Thanks a lot, John
#3
Supposedly, the 225TT had a forged crank, vs the cast cranks of all the others...
The 225TT also has a slight drop in compression, 9.0:1 vs. 9.5:1 of the others.
The actual block, rods, head, etc are probably all the same, but the crank and pistons are probably different.
Seeing that there are plenty of cast crank, 9.5:1, K04 conversions running around, I'm sure it will be fine.
The actual block, rods, head, etc are probably all the same, but the crank and pistons are probably different.
Seeing that there are plenty of cast crank, 9.5:1, K04 conversions running around, I'm sure it will be fine.
Thread
Thread Starter
Forum
Replies
Last Post
silver rush
TT (Mk1) Discussion
7
02-16-2004 08:55 AM
rsdevlin
A4 (B6 Platform) Discussion
7
03-19-2002 09:15 AM
The Ultimate Driver
A4 (B6 Platform) Discussion
15
11-15-2001 05:37 AM