How common is it for an AMS kevlar TBB to pop off?
#11
I've got the one sold by AWE. It popped off once. It turns out I did not have it tight enough
So, I put it back on, and really tightened the screws (clamps). I check it every month, and the thing has not budged.
Hairspray is a definite, if not permanent fix.
Good luck!
Hairspray is a definite, if not permanent fix.
Good luck!
#12
for any boost hose, clean the mating surfaces real good and then spray inside the hose and the
outside of the pipe with aquanet or another good holding can type fine mist hair spray. put the hose on right away. wait about 5 minutes then tighten the clamp down. now you dont have to do it as tight and riish damaging the rubber
#17
The MTM is nice but why pay almost $400 for it
Our Achtuning TBB is an easy install, looks like OEM rubber boot but is actually reinforced silicone, still allows the boost sensor bracket to be fitted and the engine cover goes on no problem, plus it comes with the clamps.
<a href="http://shop.achtuning.com/index.asp?PageAction=VIEWPROD&ProdID=543"><Img src="http://shop.achtuning.com/ProductImages/images/product_images_achtuning/Achtuning_TBB_V2.jpg"></a>
<a href="http://shop.achtuning.com/index.asp?PageAction=VIEWPROD&ProdID=543"><Img src="http://shop.achtuning.com/ProductImages/images/product_images_achtuning/Achtuning_TBB_V2_A.jpg"></a><ul><li><a href="http://shop.achtuning.com">http://shop.achtuning.com</a</li></ul>
<a href="http://shop.achtuning.com/index.asp?PageAction=VIEWPROD&ProdID=543"><Img src="http://shop.achtuning.com/ProductImages/images/product_images_achtuning/Achtuning_TBB_V2.jpg"></a>
<a href="http://shop.achtuning.com/index.asp?PageAction=VIEWPROD&ProdID=543"><Img src="http://shop.achtuning.com/ProductImages/images/product_images_achtuning/Achtuning_TBB_V2_A.jpg"></a><ul><li><a href="http://shop.achtuning.com">http://shop.achtuning.com</a</li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
Yeehaaa!!!
S4 / RS4 (B5 Platform) Discussion
16
12-19-2002 11:20 AM
S4MadMan
S4 / RS4 (B5 Platform) Discussion
15
10-30-2001 08:22 PM