MCPaudiTT - DEFCON 1

<ul><li><a href="https://forums.audiworld.com/tt/msgs/1507444.phtml">https://forums.audiworld.com/tt/msgs/1507444.phtml</a</li></ul>

eTTie

<ul><li><a href="https://forums.audiworld.com/tt/msgs/1506220.phtml">https://forums.audiworld.com/tt/msgs/1506220.phtml</a</li></ul>

TTschwing

<ul><li><a href="https://forums.audiworld.com/tt/msgs/1452481.phtml">https://forums.audiworld.com/tt/msgs/1452481.phtml</a</li></ul>

XCLR8TT

<a href="http://1.8t.org/dealers/">Dealer Ratings</a>

<a href="http://1.8t.org/tuners/">Tuner Ratings</a>

TTschwing

or why correction kits are necessary.<ul><li><a href="https://forums.audiworld.com/tt/msgs/1101053.phtml">https://forums.audiworld.com/tt/msgs/1101053.phtml</a</li></ul>

MCPaudiTT - DEFCON 1

This one took a bit longer than planned. 2 hours of work, 2 hours locating bits that have fallen in to vents, cutting off drill bits to fit tight areas, almost stripping screws, etc.

Anyway, here are the end results (for a full write-up, follow the the link below to the original thread, then to my Fotki):

<img src="http://images2.fotki.com/v327/photos/4/435091/2737221/57Allbuttonedupb-vi.jpg">

<img src="http://images17.fotki.com/v325/photos/4/435091/2737221/59Allbuttonedupb-vi.jpg"><ul><li><a href="https://forums.audiworld.com/tt/msgs/1518695.phtml">Original thread</a></li></ul>

TTschwing

<ul><li><a href="http://www.amp82.co.uk/tt/timingbelt/">http://www.amp82.co.uk/tt/timingbelt/</a</li></ul>

SparTTan

<ul><li><a href="https://forums.audiworld.com/tt/msgs/1521900.phtml">https://forums.audiworld.com/tt/msgs/1521900.phtml</a</li></ul>

JazziTT

I drilled out the rivet (1/8 drill bit) and riveted bracket back onto new pump

JazziTT

Diagram shows pin #10 (don't see a #19)