View Full Version : 12v V6 Discussion
- car and reason
- ???????????
- Can anyone translate German???
- gas mileage: is it normal under these conditions to see 175-200/tank...
- CT/NY Audi Group Get Together & Dyno Day Update - Dyno Scorecard & Car Wash
- "Not Ready" during 2nd emissions test. (96 12v A4)
- Some results for the racing throttle body...
- 17912 - Intake Air System: Leak Detected (calling Bryan12V and others)
- Brothers advice needed, gonna buy 96' A4 2.8 Quattro this Saturday
- Alright guys, I am consuming 1 qt of oil/600 miles. I am getting a compression test done this week..
- Bryans12v...
- Next question in a series entitled "My Frigid Mirrors"
- got some new "rare" throttle body info, hope this helps us all get closer...
- I fuond a genius way to make my car faster!!!
- S4 - 12V conversion Question - Plz help
- Anyone from Reno, NV?
- going with brullen, now what are my cat options...?
- how's everyone's IM Workshop going? Anyone started yet?
- CT/NY Audi Group Get Together & Dyno Day Update#5 - This Saturday 1/24...
- Timing belt - any difference between Audi and generic? Parts list?
- Best exhaust available for performance? (more)
- ECU questions... (no, not a chip question)
- updated IM Workshop link, see sig.
- Fuel Management Consistency
- Please read this ICV post, (also in the a4 forum)
- Don't know if this helps you guys looking for the mystery Throttle Body but here are Part #'s from
- haven't been here in a while
- Suhner break-in and Intake Manifold Workshop tips...
- ECT sensor ?'s
- ok... who can bring me up to speed? 12v crash course please
- Mance, you deleted some of the IM workshop posts I'm finding... That's not good!
- wheel spacer question...
- UrS4...question about stage 3 silicone...
- pics
- See anything wrong here?
- my search for the rare throttle body piece.....
- exhaust ?'s (i am new here, go easy on me, lol)
- 2.8 12V RTB Rev 2.3 (last pic for awhile)
- 2.8 12V RTB Rev 2.2
- I've got to write a Proposal Report for a class of mine...
- Part # for Headlight Switch
- 2.8 12V RTB Rev 2.1...
- dear moribund exasperated
- TEST DRIVE: Infinity G35
- Does anyone know the part number for front control arm bushings?
- Does anybody know anything about this company?
- Suhner Die Grinder.........
- Old question for the pros in 12v Forum
- 2.8 12V RTB Rev 2.0
- I "may" have the mystery throttle body identified...
- finally...warmth!!
- Mance, can you take me under your wing and teach me stuff...
- Meant to fill you guys in on my completed exaust work...
- I found a supercharger for the 12v!!!!!!!!!!!
- Mr. D, YGM.
- Annoying squeeky heater vent fan and headlight washer probelms
- Got the Suhner Die Grinder today... GAWD what a friggin tool
- 2.8 12V RTB Rev 1.0
- The cold weather finally got to my engine :-(
- Intake/Headers/Exhaust that won't make me sound Japanese?
- Extremely OT: Need advice on resume writing
- Heat
- lets play a game!
- chip/ecu
- Spark plugs
- Did we lose Mr. Tipton? And what happened to "The Fez"?
- I received my new Bosch O2 sensors and plan to put them in this weekend.
- Moribundman and Missile Man.....
- Here's the difference in outlet bores between the throttle bodies...
- I got the IM Workshop Makita die-grinder yesterday... and it is perfect!
- having my heater core replaced right now....
- Threw the CEL again this morning on the way to work. Same code as Friday. Any idea?
- Implausible Signals from replaced ECT.
- How do I remove the plastic trim/cover under the steering wheel?
- Great OEM parts resource...
- I tested my ICV today, and it read 16 ohms...
- New to the Audi Community
- Feeler post.. maybe selling the 12V
- First pic of the racing throttle body...
- Ur S4 vs camaro kill story---So Mance hear this was you...
- Just changed my lower oil pan gasket and I put in the entire 5 liter bottle of Lubro Moly. The oil
- I pulled the hood release lever (the one inside the car, near left knee), and something popped.
- A/F LCD Meter installed
- Hey ShadY12v can you be a little more specific of where to search?
- How about a 97A4 with an AAN 500+HP engine?
- okay.. I need some direction. please help me out
- let's play "guess what this is"... you guys have always managed
- Ok this is what i think i got for the mystery TB......
- HELP! Car's sputtering
- Doea anyone have a picture of the exhaust system for an A4 from the headers?
- Started my car at lunch (cold start, sitting 4-5 hours in sub 30* temps) and threw a CEL.
- desperatle need help
- UrS4 (Mance), How do you take the screen out of the MAF? I have a 2.8 30v with a cone filter ....
- heat not as hot as it should be
- Throttle getting stuck. Please help!
- She's alive!
- Guys what is the best and i hate to ask but cheapest short shift for my 96 A4?
- What Air Filters is everyone using?
- Recovery sleeve questions...
- Recieved my manifold for the IM workshop today....
- a bit nipply outside?
- CD Changer problems . . .
- Has anyone ever heard of adding extra 4 gauge ground wire to the battery to ground it to more parts
- Expert help with Ignition switch and injection feed.
- i searched the forum already
- Ok guys... thinkin of a new car 30k-ish.. Any suggestions?
- center bumper section, 95 90Q
- attention Mance!!!
- got a 30v...
- If anyone has sent me email during the past 48 odd hours...
- Fans
- VAG-COM incompatability and In 1 code
- My car has no spark
- Urs4 MAF users (and query for the man himself).
- engine temp
- UrS4, did you see this post about the"MAFTerburner"?
- What kind of exhausts are people running with 12v A4? Do you like it? TIA
- CT/NY Audi Group Winter Meet & Dyno Day - UPDATES #3
- Anyone know if the power steering pump from a 97 2,8 L a4 will fit a 96 a4?
- Need Ported TB and Manifold
- guys, i was driving today and all of a sudden my sunroof opened, scared the ish out of me
- Calling MikTip, Kris Hansen, or anyone else - coolant flush
- Hello from Minsk, Belarus!
- UrS4, and all doing the IM workshop.....
- 96 and 97 A4 owners with the Delta HU and CD changer,..I need a favor..
- I've now flow-tested at least 3 of every known (to me) throttle body used on the 2.8 12V...
- Car Temp
- Free 100/200 A6 hood...
- Wheel spacer questions..sort of.
- Xpost... Billowing blue smoke, not billowing anymore, but still...
- Does Borla sell a muffler for the 12v A4? If so, where do I find one. Thanks
- The gizmo has been installed
- Gas Light
- UrS4
- X post: CEL error codes
- Paging Mr. D Extraordinarily Aspirated
- control arms
- Is the Intake plenum gasket the same as the TB gskt or....
- First trifecta block of 2004 on the 12V forum!
- First project of 2004!
- First post of 2004! ;-)
- So I was driving with my 6 year old in the back seat, and had to accelerate to avoid a red light...
- Happy New Year to all you fellow Audi types! ;O)
- UrS4, and others: I just whipped out an old Intake manifold from my 91 VW...
- question re VS and stalling at idle
- Happy New Year 12v'ers!
- Air Flow Increase......
- Where is the best place to tap into the MAF wires?
- Hey guys I've been having some issues with the car stalling. I cleaned the ICV and thought I had to
- Finally got the S3 hose kit installed to my satisfaction (thanks Mance).
- hey guys, i threw these codes today, anybody know why....
- STFA and ECT location on 96 12v?
- Velocity Stack Questions.....
- UrS4: Does my MAF sensor need to be working to do the exhange for S3 MAF?
- CEL light came on... any ideas?
- Hey, does anyone have the link for the road-rashed-rims...
- Paging UrS4 [please 8-)]
- catalytic converters
- Pic of installed Stage 3 Silicone and vacuum solenoid plate
- A couple of required items for the IM workshop:
- anybody here got a Vag-com they want to sell?....
- What's the best method for tapping into an O2 sensor wire?
- Update on driver window problems help me please
- Just to make sure: using the S3 hose/sleeve, I can keep the cap on the sleeve, and let the line...
- How far do I keep compressing?
- What did you use to remove the pre-cat O2 sensors? I have an O2 sensor wrench, but the angle of the
- Problems with my driver window EDITED
- Opinion/help needed... After putting in a new evap core and heater core I have noticed that...
- Oil Pressure warning light for just a few seconds (moderately long for ADD sufferers)
- slowly saving money for some possible engine upgrades...
- Stage 3 Silicone installed . . . some nice gains over Stage 2 . . .
- What do you guys recommend for replacement fuel lines?
- IM Workshop: Porting Tools List
- Engine Issues
- S4 exhaust to 2.8 A4??
- Installing S3 hose kit tomorrow. What size machine screw do I need to plug the vacuum line on the..
- Hrm where to find a bentley guide for my audi? :)
- TO:URS4
- Replacing the lower oil pan gasket. Should I use RTV on it? It's a metal gasket. Thanks!
- Does anybody know...
- Exhaust advice
- need more speed please help.
- MERRY CHRISTMAS!
- I found 2 faults when I checked my CEL, anyone know which 02 sensors these are?
- HELP!!! I've got the CV joint blues
- Made a mistake...
- Big brother is watching Santa
- DIY Throttle Body Port
- thanks mance. i got the S2 hose kit in today.
- Peace and a happy Christmas to all of you!
- Insurance Money!
- Need help...still wet behind the ears
- Installed my new Manifold Switchover Actuator last night. I missed the >4k power!
- IM Workshop: For those emailing/asking about the EGR port I've polished...
- I "may" have a work-around for the non-variable speed Sears die-grinder...
- UrS4 - I picked up some of the VersaChem Magnum Steel that you mentioned earlier.
- OFF TOPIC, but.. I am thinking of ditching my cable provider and getting a satellite..
- Picked up one of the Sears Grinders that UrS4 reccomended.
- Brief installation notes for those receiving S2/S3 parts...
- Mance, what do I use to replace the breather hoses?
- The verdict is in.
- Question about the Split Second ARC 2...
- moribundman! Everything OK out there?
- Again about the German ECU
- Coolant Flush Questions?
- IM Workshop: EGR passage finished
- a few questions
- Can anyone tell me anything about Borla exhaust and dynomax
- IM Workshop: MAJOR UPDATE for all interested. HUGE DISCOVERY!!
- IM Workshop: First Stage flex hone of EGR passage
- Hmmm. Someone got suspended. :-)
- IM Workshop: Something else you'll need
- IM Workshop: One runner in the IM cover is complete!
- chirping sound when accellerating
- UrS4, I made some graphics for you because I got really bored...
- Is 30mpg an unreasonable goal?
- I like how my post was deleted.
- I noticed some rough edges inside of my headers. Before I install them I wanted to smooth it out
- IM Workshop: Got a little IM-time in last night and found that...
- S4 exhaust question
- her UrS4, or anyone, what do you think of this....
- Which is better, cone or box with UrS4's velocity stacks....
- I need to ask a favor from someone...
- IM Workshop: I've got some good news and some bad news regarding the EGR provision....
- Has anyone ever modified the stock strut bar on the 90??
- Need some help! Lights wiring Diagram?
- here is a pic of the new s4v8 4.2 air tube into the maf ..
- IM Workshop: tools for the workshop
- For you guys w/ ETKA: lets play "Name that part."
- would this work
- I'm done for the day, naptime!! I'll get pics of the IM Workshop tools up later...
- Re: Back to converting 4 Wire MAF to 3 wire on older ...
- How many DIY IM project participants do we have? State your name and vehicle type:
- For the IM project, will an intake from a 1997 A6 work?
- engine/oil temp gauge
- Sorry guys... stupid question: How do we search THIS (12V) forum?
- Hey guys, I need a new ICV and dont want to spend $180, you guys think its ok to buy a used one? I
- 2nd annual Audi meet Dec 20 @ 1 pm - North Vancouver, BC
- car threw a CEL
- IM Workshop: update on boring/grinding/honing & polishing tools
- qpilot, what do you think of this headset?
- this WED is the Kansas city area Quattro clubs FIRST meeing at Jay wolfe Audi
- I test drove a Subaru WRX STI this weekend...... comments inside
- Hey Mr D, when are you gonna come up to see the Pen's so I can get a ride in your car!
- UrS4 - Itching to begin the IM project. Where should I start?
- Mr. D - OEM Gasket source?
- UrS4: Thanks! I just checked the changeover by pressing the cruise control thingy ... and it works
- soooooooo...... did I miss out on all the Acid action?? nE1 else still need to get some?
- Is 078 133 159 A the correct part number for the Intake Manifold Switchover Actuator?
- Can I somehow check my old MAF?