View Full Version : 12v V6 Discussion
- Timing Belt time, any one interested in selling the 3242 and 43?
- It was all going too smoothly. Gonna have to be a delay on all the throttle bodies in here...
- I think I know the answer, but just a quick question...
- anyone need equal length headers?
- Several New Projects Done................
- Johnny AFC-No-Spark : Alright, I've narrowed it down and I think the hall sender is bad
- Changing water pump W/O vag tools
- Teaser picture............
- Well the SXTB and Light weight pulley are in place. My 12v thanks you Mance!
- my new intake mods
- Fuel Hose Specifications for 1996 A4?
- is the ignition control module something that wears down before going
- I've got one of these intakes left...
- Installed SXTB. Now there is a strong whining sound . . .
- Enlighten me.
- where is the best spot to put in a fuel pressure sender? i searched and couldn't find much
- Did you guys use silicone between the Plenum/gasket/throttle body?
- gosh. after all this trouble ive gone throught to port my IM and such, i could have just
- Oil Choice for high-consumption engines
- anyone know which wirre in the harness is the oxygen sensor's signal wire??
- Anyone have pictures of the crank position sensor?
- Mileage poll: 182k here
- brain food
- No spark after TB change. Motor just cranks.
- Trany Fluid alternatives ??????
- Is there an easy way to clean the blowby filter inside the valve covers?
- Bead blasted AFC exhaust manifolds...
- Stupid ? and I feel like an idiot for asking, changing plugs
- can head pipes be removed without removing heads?? (B4Q)
- received LWPSP yesterday & it's mounted...
- Head building Q's
- 20VT90q you inspired me to go take some pics...
- Car kept hesitating, than stalled and threw P1504 Code
- how about this one:
- A tid-bit on CV joints added to my archives...
- mmmm turbo placement
- EGR insuf. flow-hey austinado got a quesion
- sandblasted and glyptal inside of lower IM
- Gee, thanks Bentley for making me pay $20 to upgrade your software. The old one worked fine.
- Just installed my newly modified T/B, the only downside is...
- I can hear the buzz and humm from here....
- it hurts to gaze upon the coveted machine. actually my
- I've got some lifter tick sound, what oil should I try
- Changing oil this weekend, any suggestions?
- i just uploaded pics (in my pic poster)of the lower half of the IM, just finished
- does anyone know where i can buy one of the silicone 90 degree elbows that fit our throttle bodies?
- can someone please tell me the part # for the oil cooler seal?
- Why would Rob (Motodyne) email me?
- gettin ready to install my ported IM.. anything i should know before i get
- Check out my new ride...
- TOTALLY off-topic but I just received my new 16GB iphone from AT&T...
- ***orders 272 cams + 10lb flywheel***anyone have a silicone throttle body 90 degree boot 4 sale?
- Thanks Mance! Got the pulley.
- M5 with rear mounted turbos. Looks pretty cool.
- Anyone have a spare ISV?
- anyone have the throttle body installation notes? i seached and couldn't find them.
- Still waiting for my LWPS pulley. I hope it shows up on monday.
- a little gift to the first one who grabs it.
- Got my black wheels installed...
- I'm ready to learn the secret handshake now. I just installed my RS3 MAF and VS...
- peep the wheels i just scored!!
- good way to port/polish all the way through the lower IM runners.
- The lightweight pulley is on...
- so as ive been porting my IM i noticed the runners start small (in diameter)
- ps part arrived...
- MAF pics as promised
- via the postal services website i should have a new lwps pully at home:)
- Is this piston damaged? Pics inside
- GOOD NEWS!
- I'm looking for a non-usable (warped, etc.) 12V head to practice gasket matching on if...
- POS heat sinks...
- Coolant drain plug location of the engine?
- i wanted to take this moment to tell you all here on this forum that i am deeply sorry
- I just ordered some paint...
- How do these plugs look?
- NGK BKR6E, anyone use them?
- What's a sport steering wheel with airbag going for nowadays?
- TURBO OR BETTER YET TT
- Modified MAF? Pics?
- Best Way to Remove Head on 12V V6 AAH?
- how many enjoy these?
- Does someone have the part number for the oil check valves...
- Well, now that we have LW PS pulleys...it's time for some LW alternator pulleys!
- Anyone have a spare B4 airbox?
- The cut-off date is now past for receiving PS Pulley cores for machining/lightening...
- Head Gasket Question?
- Paging Orlando 4000S: There's a package coming your way.
- Has anyone here that ever sent me a Paypal deposit or payment of "any" kind...
- Cleaning the egr valve this weekend in my a4
- PS pulley install help.
- **SPECIAL ANNOUNCEMENT** to ALL Canadian PS Pulley purchasers....
- Mance ygm
- Lightend my car by 27.6 oz by removing the....
- A weird brain teaser
- reading some older archives..
- This might be better asked on the 90 forum, but my car shakes when i shift into 3rd or higher...
- Is this a STB? Do I need to remove any other components before sending this TB to Mance?
- 12V Head Interchangeble
- i got my Stb in the mail while i was out of town..
- Adding "Psychological Horsepower"
- My first attempt at moving this forum forward...IM Insulation/spacing/whatever
- <crickets chirping> Ya know it's an interesting concept that so many feel obligated or...
- LWPS pulleys start shipping today and a question...
- long term silicone properties question.....
- It LIVES! New A4 project fired up today.
- Removing sludge with diesel flodding technic, what say u?
- We went for a wild ride Tuesday night!
- Think it's a good idea to throw in a new expansion tank?
- VAP. I dont know how to change the address on paypal from u.s to canadian.
- FYI, Arrow-Magnolia now sends Bulldozer in one giant 7gallon container.
- Custom Heat Sink installed............
- I'm starting to receive throttle bodies in here for the next production run in April...
- Could someone explain how the "Mance" exchange system works?
- slightly eccentric
- Grrr, I'm off to the junkyard. Looks like I need another 15-20 PS pulleys....
- Some PS pulley trivia related to Engine RPM vs PS pulley RPM...
- Fuel pump noise?
- UPDATE; 2 LWPS pulleys remain. Seems some other forums tuning in here...
- I whipped these up today, kind of ugly on the outside, but the inside is nice and smooth
- Crank Pulley
- 3 am, peeking in and tip-toeing around. Hmmm ok let's try again...
- Hi. My name is Dave and I have an Audi problem...
- just seafoamed my car...
- Guys check this link out.
- What's this stuff worth? <Edit>
- Whoa up guys!
- The tribe has spoken. Mance, you stay.
- Is the exhaust note of a 30v very different from a 12v?
- once i have a pic in the picture poster is there any way to resize it?
- Anyone here feel the same as I do
- Anyone know where I can buy QuikSteel?
- Can anyone do a reverse DNS search for me?
- so i contacted this guy that i am supposed to be (motodyne) or whatever it is
- Tour Through a Modest (& Mostly OEM) Intake System; Intro...
- Glyptal substitute?
- There's nothing like the smell of emminent martial law in the morning to...
- I found a way to turbo my 12V
- Moderator was here...
- Some Guidelines
- Anyone know off hand the wrench size needed to remove the fan clutch system
- Re: Enough is enough, ***hat Containment is now in full effect on this forum.
- containment activated!
- Hey everyone, let's see what you got surrounding your 12V...
- this may be a dumb question but whats the best way to pop the hood? my hood release just broke:(
- i know this is off topic, but you all need to see this, cant believe the world is giving em the.....
- What's the verdict on ram air incuction with the 12 valve?
- Anyone else use a FilterMag?
- OK!! I just popped over here from the "Model Discussion" on 80/90 coupe
- SXTB Impressions...SXTB vs. XTB...
- Why was my post removed??
- Paging VAP and asv4k8: Could you guys please take the cat fights else where?
- Unorthodox Racing Flywheel.
- Wow over 105 pages have passed since I first joined
- Luxus the ship has docked . . .
- a rather interesting link as well on head porting and polishing
- found this on youtube, not an audi but definitely displays performance that we should try to match.
- Here is the "s" tb i found on that 4cyl side by side with an a4 2.8 one:
- Oil filter help x-posted from C4
- Has anyone here had the 12v block sleved? if so what should i expect to pay?
- bumping this post up as I took too long to answer....
- Ok you 3 "whores", your SXTB's are on the way. Everyone's should be there no later than Saturday...
- Swapped my Hitachi ECU with a Dell and my car seems slower now. It takes 5 min. to start up.
- water pump
- Hey Mance, are there 'S' and 'RS' versions of the Velocity Stack you made?
- 6 XTB throttle bodies shipped Friday. The 3 remaining SXTBs will be finished today/tomorrow...
- Won't be around the 12v forum as much as in the past.
- Who is the current preferred vendor for rental of 12v AFC timing belt tools?
- Motodyne Myspace - what a joke.
- if you cant deal with it, delete it..
- i dont speak, or read deuch, so can someone tell me by looking
- i have read a few discussions here about the hitachi ecu, and how restrictive it is.
- After today's work on Orlando 4000's 90, I am so grateful I have alot more room under the hood....
- X-Post from the 90 forum
- has anyone attempted to compile a list of mods with their respective gains and costs??
- M. What diameter were these flex hones?
- any input on a good performance cam for a daily driver? not too much mpg loss.
- installing new O2 sensors
- need help with part numbers please.
- Gee, I've made Motodyne aka Rob mad......
- Not for the weak of heart.
- How many feet of vacuum line for the 95 90Q?
- Stupid question regarding 12v
- X-post: Coolest thing since sliced bread for those that don't wanna invest in real-deal harnesses...
- about how hard is it to replace the lower oil pan gasket?
- the definition of pain... theres a black 1994 rs2 avant on ebay.uk for 10,000 quid.
- how do these guys get away with selling these "65hp" chips on ebay. ??
- Is there a write up for a diy compression test on a 12v a4?
- were the last 12V's produced in 1997?
- Cheat sheet?
- Now I remember why doing throttle bodies is SUCH a "grind" (pun intended)...
- was the RS2 every made available in the states?? i know this isnt a questionabout the 12v
- question. are there any differences in intake manifold between a 95 and 97 12v??
- has anyone attempted to fabricate an intake manifold w/ pipe?
- Update: I'm now running a large bore 3 pin MAF on my 92.
- was +2 (C) today so I did some winter up keep on the 12V
- Pikes Peak 2005
- so, if your intake is only as good as the smallest diameter opening along the tract,
- The making of a lightweight Power Steering pulley...
- For those running Nology Wires, due pulse star spark plugs use similar technology?
- what's the most power that has been coaxed out of a 12v
- Mailman delivered two nice things for me today... sorta
- 272 cams first testdrive!
- Bulldozer degreaser...I'll try one more time...
- Final XTB/SXTB UPDATE: as of 6am this morning there are 2 "exchange program" XTB's...
- new sorce for s throttle body...bodies....besides the a6.....read on...you too mance !
- Ok, I'm going to make a preliminary run of 4 XTBs and 1 SXTB next week....
- New ETKA crack?
- Mr dooby, can you send me your address again plez I lost it :(
- anyone ever ran 2 cyl oil in their fuel?
- Just for the heck of it: Is "twin plugging" do-able?...
- Just bought an IM and a throttle body...
- any tips on simple tweaks to pass dam california smog inspection?
- Reminder to those that owe me a MAF core from the RS3 MAF run...
- What resonator should i run to minimize the raspiness?
- Dont get any crazy idea's and up your price Mance.
- Still have S3 MAF and VS for sale
- manual swap?
- The end of Rob Hack, aka MotoDyne?
- would the s type TB offer a significant gain without being bored
- has anyone swapped a 30v into a b4 with success??
- Mr Dooby....the eagle has landed.
- I'am searching for exhaust. from manifold to behind the cats.
- Exhaust gasket
- Oil Light
- Here is a site we can all use: Speed trap listings by state/city w/ frequent updates
- help diagnosing a problem: A/C doesn't blow cold air and heater blows warm air at the 'hi' setting
- I am just polishing away at my EGR passage right now and I saw this in my dremel kit...
- Now the forum is really coming back to life!!! It just needed to be "turbocharged"...(pun intended)
- 1996 Audi A4 2.8 (Not a Quattro) Coolant Temp Sensor
- A half baked moment in response to 7 posts down vvvvvvv
- PnP 3 pin MAF adapter for cars with 4 pin MAF
- Few more technical/specification questions for those with answers......
- Anybody know the total diameter of a stock flywheel? And clutch disc?
- Eurospec 272 video?
- Lightweight PS pulleys will be sold on an "exchange basis" just like modified TBs & MAFs...
- I have 21 fully inspected and "true'd" (for axial/radial run-out & concentricity) PS pulleys...
- warning to all here who would do business with asv4k8
- Q: on the 5speed manual tranny, where does it break first, im swapping one in and want to do some...
- at the rate this forum is going, someone is going to hit 500hp on a 12v SOON
- 240miles S3 maf thoughts..
- Magnaflow exhaust sound clips/videos...
- Time to mix it up a little... we're getting a bit stagnant. Got lightweight?
- Anyone need a Intake Manifold and Throttle Body?
- need someone to help me please
- I tried a dif. approach at boring a non s throttle body...didnt want to use epoxy this time
- asv4k8, are you out there??
- O2 sensor fault code question.
- just as there are many different tb's ...
- custom headers
- Pic of the machine shop ive been using thought it might interest some